EJ-FG05V LCD Lithium Battery Lifepo4 lead acid iron Battery Monitor Capacity Indicator LCD Display Remaining Detector Tester

Product overviews:

EJ-FG05V is a kind of current type battery capacity tester. It is designed to test the voltage, current, and capacity of the battery, and help users know the state of the battery in time. It is suitable for instruments, measuring equipment, cleaning machines, balance cars battery cars, e-bike and so on.

Application：
The EJ-FG5V battery tester is suitable for lithium battery, lithium iron phosphate battery, lead-acid battery, and nickel-metal hydride battery which voltage is from 8.0V to 80.0V.

High voltage and high current-Voltage 80V current 150A

The EJ-FG05V coulomb meter rated voltage 80v, the actual use can reach 100V; applicable to different power motors;

According to the current size, divided into 4 specifications: 80V50A, 80V100A;

50A specification maximum current can be up to 75A, the same, 100A maximum 150A.

The following are 50A, 100A two specifications sampler:

Install:
1. Open one rectangular orifice and two screw holes on the panel of the equipment;
2. Then install the battery tester from the front of the panel, and put the shell of tester into the rectangular orifice;
3. Finally, fix the battery tester with tapping screws from the front of the panel. As shown below:

Connect:
1. Prepare a shielded wire and an ordinary wire (0.3-0.75 mm²);
2. One end of the ordinary wire connects to B+ of the battery;
3. Another end connects to B+ of sampler (anyone is ok);
4. The B- of sampler connects to B- of the battery;
5. P- of sampler connect to P- of output;
6. Finally, connect the sampler to battery tester by the shielded wire.

Attention: Please connect as shown strictly. The sampler must be connected to the negative circuit, it is forbidden to connect to the positive circuit. If you want to extend the shielded wire, you must use 4 lines of the same specification.