EJ FG08 battery SOC tester

//EJ FG08 battery SOC tester
EJ FG08 battery SOC tester 2018-02-13T07:06:21+00:00

Project Description

ADVANTAGES


(1) Optional Battery type;
(2) Anti-reverse function;
(3) Waterproof;
(4) Easy installation;
(5) Applied for lead-acid,lithium battery(not recommended to use for LiFePO4 battery);

Specification adjustment :
Press and hold the down key on the back when turning off, then power on. LCD displays the present specification. Then use the key to adjust specifications, select suitable specification you need, then turn off and power on again. The battery indicator will be work normally (correspond code as below form).

Connection:
The battery indicator provides a connector consists of the plug, black line, and red line. Connect the black line to the negative, the red line to the positive, the plug to the socket of the battery indicator. Then, power on or turn on the switch, it will be work. As shown below:

Install:
1. Open a rectangular orifice and two screw holes on the panel of the equipment.

2. Then install the battery indicator from the back of the panel, and put the prominent LCD in the rectangular orifice.

3. Finally, fix the indicator with tapping screws from the front of the panel. As shown below:

Parameter
Min
Type
Max
Unit
Working voltage
8.0
63.0
V
Working power consumption
5.0
mA
Using temperature range
0
25
40
Size
60*23*15
mm
Weight
13.0
g